Global Water WL16U-060-150 WATER LEVEL LOGGERS (0-60 ft,150 ft)

  • Manufacturer: GLobal Water
    Model: WL16U-060-150
    Guarantee: 12 month
    • Request a Quotation Request a Quotation
  • 36,462,600 VND
  •  Call for best price

    Hotline: (+84) 867820758

    Phone+84 (24)62923267

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Manufacturer: Global Water

Model: WL16U-060-150

Order No.: ARD150

Warranty: 12 months

Water Level Data Loggers

Power:  Two 9VDC Alkaline Batteries

Battery Life:  Up to 1 year (depending on recording intervals)

Resolution:  12 bit

Moisture Protection:  Protective coating (helps prevent damage to electronics from condensation)

Temperature:  -40° to +185°F (-40° to +85°C)

Humidity:  0-95% non-condensing

Memory:  Non-volatile flash memory

Storage Capacity:  81,759 time and date stamped data points (including battery voltage)

Sample Modes:  High Speed (10 samples per second), Fixed Interval (Programmable from 1 sec to >1 year), Logarithmic, Exception

Data Overwrite:  Select memory wrap or unwrap (unwrap will stop logging data once memory is full)

Clock:  Synchronizes to the time and date of user's computer

Clock Accuracy:  0.0025% or 1 minute in 1 month

Clock Format:  Month/Day/Year Hour/Minute/Second

Enclosure:  1-7/8 inch dia. x 11-1/2 inch length (4.8 cm dia. x 29.2 cm length) (fits inside a 2 inch well), stainless steel UV protected PVC vented for barometric pressure compensation

Weight:  1.6 lbs (0.7 kg) (with battery and 25 ft cable)

Communication Port:  

     WL16U: USB Type B

     Selectable Baud Rates: 9600,19200,28800,38400,57600,115200

Global Water Level Loggers Software:  Microsoft's Windows 98, ME, 2000, NT, XP, Vista, and 7

Water Level Logger Vented Cable

Conductors:  4 each 22 AWG

Material:  Marine grade polyether jacket, polyethylene vent tube, full foil shield

Shield:  Aluminum Mylar

Outside Diameter:  0.306 inch (0.78 cm)

Temperature Range:  -22° to +185°F (-30° to +85°C)

Length: 150 ft

Submersible Pressure Transducer

Sensor Element:  Silicone Diaphragm, Wet/Wet Transducer

Water Level Measuring Range:  0-60 ft

Linearity and Hysteresis:  ±0.1% FS

Warm-Up Time:  3 seconds recommended

Overpressure:  Not to exceed 2 x full scale range

Accuracy:  ±0.1% of full scale at constant temperature, ±0.2% over 35°F to 70°F (1.37° to 21.1°C) range

Compensation:  Uses dynamic temperature compensation 30 to 70°F (-1.1 to 21.1°C). Automatic barometric pressure compensation

Housing:  Up to 13/16" diameter x 5-1/2" long (2 cm dia. x 14 cm long)(small enough for a 1" well)

Material:  304L Stainless Steel, SS microscreen (hundreds of holes to prevent fouling), electronics are fully encapsulated in marine grade epoxy, guaranteed not to leak




Quick sheet 

Apply your mail to get promotion information