- Quality Engagement
- Easy change and return
- Delivery Avaliable
- Favorable payment
Interior size (WxHxDmm): 500x450x450
Exterior size (WxHxDmm): 1540x1840x1700
Low Temp. chamber: -55℃～-10℃
Pre-heat time: +20℃～-55℃ ,Within 60 min
Test. chamber: -40℃～+150℃
High Temp. chamber:+60℃～+200℃
Pre-heat time: +60℃～+200℃ ,Within 20 min
Recovery time: High-Temp Exposure 30 min
Low-Temp Exposure 30 min
Recovery time within 5 min
Safety device: No fuse breaker, over pressure、 over heat and over current protection for compressor,over temperature protection,
over load protection for blower, dry heat protection
Standard accessor: Cable port(portΦ50mm)*1, shelves*2
nterior material: Stainless steel plate（ SUS 304）
Exterior material: Baked painting steel or stainless steel(SUS304)
Insulation material: Rigid polyurethane Foam+glass fiber wool
Refrigeration system: Water Cooled
Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant（ HFC-507 and HFC-23）
Power AC 380±10％ 50Hz ,3 phase 4 wires +Ground Wires
Thermal Shock Test Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short time, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, auto parts, chemical materials, electronics and other materials. The test results can be used as a reference or basis for product improvement.
KOMEG--STAR OF ENVIRONMENTAL TEST EQUIPMENT
KOMEG Technology Industrial provides KOMEG star brand of environmental test equipment in China since 1990.KOMEG has specialized in climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in room and aging test chambers, drying ovens, salt spray testers, medical laboratory equipment etc.
NO 1 BEST SELLER
KOMEG brand of temperature and humidity test chamber is the ideal simulation test chamber for all heat and cold testing between -40 ºC and 180 ºC temperature range. Well-suited for reliability testing based on current test standards in the temperature range of -40 °C to 150 °C and 10% to 98% RH.Meet all requirements for extreme testing and low temperature alternating climate profiles from -70 °C - 150 °C with humidity.
A SPECIALIST SINCE 1990
KOMEG factory is located in Dongguan, covering an area of 5,000 sqm, with over 52 employees including 26 R&D engineers. KOMEG also have offices in Shenzhen and Songshan Lake National Hi-Tech Industrial Development Zone.Being a first-class supplier and reliable partner, KOMEG are certified to ISO 9001 and got CE approval.
KOMEG Product Catalog