emin

M&MPRO LMLX1010BS Light meter

  • Manufacturer: M&MPRO
    Model: LMLX1010B
    • Request a Quotation Request a Quotation
  • Contact
  •  Call for best price

    Hotline: (+84) 867820758

    Phone+84 (24)62923267

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment



Specifications

Display:

Range:

 

 

Minimum value:

Accuracy:

 

    

Temperature characteristics:

Measuring speed:

Photo detector:

 

Temperature / humidity for

Temperature / humidity storage:

    
Input limit:

 

Size:

 

 

Weight:

Voltage:

     
Accessories:

 


3 1 / 2 digits LCD display, showing a maximum value 1-100000 Lux 1999. (3 Ranges)

20.000 Lux range: reading X 10

100,000 Lux range: reading X 100

1 Lux

≤ 10.000 Lux: ± 4% rdg ± 0.5 f.s

≥ 10.000 Lux: ± 5 + 10 digits (for calibration standard incandescent light at 2856K color temperature)

± 2%

± 0.1% / oC

0.2 times / sec.

 

0 ° C to 40 ° C (32 ° 104 ° p-p) 0-70% Rh

-10 ° C to 50 ° C (14 ° 122 ° p-p) 0-80% Rh

The use of "1" (2.000 Lux/20, 000 Lux)

Display "OVER" (100,000 Lux)

 

106X57X26mm (detect image)

230 X 72 X 30mm (meter body)

150 cm (picture detecting lead)

190g

A PIN 9 V,



Origin: American Technology
Warranty: 12 Months

 

Detail


• accurate and easily read.
• High Accuracy.
• LSI circuit use provides high reliability and durability.
• Allows a wide range of light measurement.
• Press the PIN key.
• Automatic adjustment of 0.
• LCD display helps lower power consumption.
• Compact, lightweight, and intelligent operation.
• LCD display can clearly read even when a high intensity light.
• light sensor allows the user to perform measurements in the optimal position.

Power consumption ~ .2 mA, user manual, battery, carrying case

Operational guidelines
1. Insert the PIN, and then press the button to open the "ON".
2. Press the range switch to select the desired range.
3. Remove the photo detector and face it to the light source in a horizontal position.
4. Read and check the values ​​from the LCD screen.
5. In scope: if the machine only shows a "1" in the MSD, the input signal is too strong and the higher range is selected.
6. To keep the data, press the "HOLD" stop the clock all the measurements and check the value stored on the LCD screen. when you press the "ON", the value of holding will be destroyed.
7. When measurement is complete, close the cover photo detector and shutdown using the "OFF"

Apply your mail to get promotion information