For full functionality of this site it is necessary to enable JavaScript.

MEMMERT VO29+PMP Vacuum Ovens

Volume: 29 liters

Interior dimension: 385W x 305H x 250D mm

Exterior dimension: 550W x 607H x 400D mm

Max. number of thermoshelves: 1

Max. number of thermoshelves (with premium module): 2

Temperature measured through 4-wire Pt100 sensor individually for each thermoshelf

Working temperature range: min. 5°C above ambient up to 200°C

Setting accuracy: 0.10C for setpoint and actual value

Temperature variation in time (to DIN 12880:2007-05): ≤ ± 0.3 K

Temperature uniformity (surface) at 160°C/20 mbar: ≤ ± 2 K

Vaccum range: 5 – 1100 mbar

Pressure control: digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum, air and inert gas are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air.

Permitted final vacuum: 0.01 mbar

Maximum leckage rate: 0.01 bar/h

Pump control: speed control, optimised rinsing procedures for the pump membrances as well as signal output for pump ON/OFF

Connection: vacuum connection with small flange DN16, and gas inlet with small flange DN16

Adjustable parameters: temperature (Celsius or Fahrenheit), pressure (vacuum), programme time, time zones

Language setting: German, English, Spanish, French, Polish, Czech, Hungarian, Italian

ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays

Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function SetpointWAIT: the process time does not start unitil the set temperature is reached

Interface: Ethernet LAN, USB

Programme stored in case of power failure

Programming: AtmoCONTROL sofware on a USB stick for programming, managing and transfering programmes via Ethernet interface or USB port

Temperature control: mechanical temperature limiter TB, protection class according to DIN 12880 to switch off the heating approx. 100C above norminal temperature

AutoSAFETY: additionally integrated over-and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature

Alarm: visual and acoustic

Fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing) for each thermoshelf

Thermo shelves: 2 connections for thermoshelves in the rear

Material: hermetically welded stainless steel interior of extremely corrosion-resistant stainless steel, material 1.4404

Door: full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen

Housing: rear zinc-plated steel

Ambient temperature: 5 – 40°C

Humidity: max. 80% RH, non-condensing

Voltage: 230 V, 50/60 Hz

Electrical load: approx. 420 W


Accessories:


+ Vacuum Pump PMP

+ Calibration certificate for 160°C at 20 mbar pressure for each supplied thermoshelf together with the vacuum oven

+ 1 thermoshelf of aluminim, material 3.3547 (ASTM B209) with integrated large-area heating

+ Manual


Details

Datasheet 


  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information