emin

Mitutoyo HH-411 Hardness Testing Unit

  • Manufacturer: MITUTOYO
    Model: HH-411
    • Request a Quotation Request a Quotation
  • Contact
  •  Call for best price

    Hotline: (+84) 867820758

    Phone+84 (24)62923267

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment
Manufacturer : Mitutoyo - Japan
Made in : Japan 
Warranty : 12 months
- Impactor : D type
in addition, compatibility probe with unit : 
DC type : For inner walls of pipes (optional accessory)
D+15 type : For bearings and gears (optional accessory)
DL : For narrow features such as small gear teeth and welded corners (optional accessory)
- Range : 
Leeb : 1-999HL, resolution : 1HL
Vickers : 43-950HV, resolution : 1HV
Brinell : 20-894HB, resolution : 1HB
Rockwell C : 19.3-68.2HRC, resolution : 0.1HRC
Rockwell B : 13.5-101.7HRB, resolution : 0.1HRB
Shore : 13.2-99.3HS, resolution : 0.1HS
Tensile streng : 499-1996MPa, resolution : 1MPa
- Function : Auto Angle Compensation Function, Offset function OK/NG judgment function, Conversion function Data storage function: 1800 data entries
Statistical analysis (Average, Maximum, Minimum, Dispersion) Auto sleep function, Impact counter display function
- Testable workpiece limits : Minimum 5mm or more in thickness and 5kg or more in mass (When the sample mass is 0.1kg or more and less than 5kg, fix it against a larger mass to make it testable.)
Test points: 5mm or more from the edge of the sample, 3mm or more to each of the tested points.
Surface roughness of samples: Ra 10µm or less
- Output : RS-232C
- Power supply : Alkaline AA battery 2pcs (battery life: approx. 70 hours) , AC adapter (optional accessory)
- Size / Mass : Display unit: approx. 70 x 110 x 35 mm, 200g , Impactor: approx. ø28 x 175 mm (tip : ø22mm), 120g
Standard : Battery AA x 2, Manual, Impact D, Hardness test block, werch, brush, Cable for detector 
 
Optional accessories :
264-504 : Digimatic Mini- Processor DP-1VR
937387 : Connecting cable , For DP-1VR and display unit
09EAA082 : Printer paper , For DP-1VR 10 rolls / set
810-622 : Thermal printer , With a connecting cable for DPU-414
19BAA157 : Printer paper , For DPU-414 (TP411-28CL)
19BAA238 : Connecting cable , For PC and the display unit RS-232C (for DOS / V PC)
526688 : AC adapter , For the display unit (AD908N) 1
19BAA243 : Hardness test block : 880HLD (ø115mm, t33mm, 3.7kg)
19BAA244 : Hardness test block : 830HLD (ø115mm, t33mm, 3.7kg)
19BAA245 : Hardness test block : 730HLD (ø115mm, t33mm, 3.7kg)
19BAA246 : Hardness test block : 620HLD (ø115mm, t33mm, 3.7kg)
19BAA247 : Hardness test block : 520HLD (ø115mm, t33mm, 3.7kg)
19BAA248 : Support ring , For convex surface of cylinder (R10-R20)
19BAA249 : Support ring , For convex surface of cylinder (R14-R20)
19BAA250 : Support ring , For convex surface of sphere (R10-R27.5)
19BAA251 : Support ring , For concave surface of sphere (R13.5-R20)
19BAA457 : Carbide ball , For D, DC, D+15 type impactors
19BAA458 : Ball shaft , For DL type impactor
810-287 : Impactor UD-411 , D : approx.ø28 x 175mm, 120g (tip:ø22mm)
810-288 : Impactor UD-412 , DC : approx.ø22 x 85mm, 50g (tip:ø22mm)
810-289 : Impactor UD-413 , D+15 : approx.ø28 x 190mm, 130g (tip width 11mm)
810-290 : Impactor UD-414 , DL: approx.ø28 x 230mm, 140g (tip:ø4 mm)
Detail

  datasheet

Apply your mail to get promotion information