For full functionality of this site it is necessary to enable JavaScript.

Tokyo Keiki MRG-10 Microwave level gauge

1.General 
- Measuring principle: Time Flight impulse Radar technology
- Operating frequency : 5.8 GHz 
- Half power beam angle : Rod antenna: 30deg., Cone antenna 4”: 34deg.,  6”: 22deg.,  8”: 17deg. 
- Microwave output power : Max 1μW 
2.Display / Configuration : Local display : 5 digit LCD display with 4 configuration buttons.  Level, Ullage, Volume, Current or Amplitude output 
3.Electrical   
- Power supply : Loop powered 16-36 VDC (16-30VDC in Ex applications)
- Output : Analog DC4-20mA +HART 
- Output variable : Level, Ullage in m or ft. Volume in %,  Amplitude in dB. 
- Signal on alarm : Hold,  Low(3.9mA),  High(22mA) 
- Cable entry : 2-M20×1.5(Applicable Cable diameter : 6.5-9.0mm) 
4.Mechanical 
-Antenna : Rod antenna, Cone antenna   4”,  6”,  8” 
5.Environment Condition 
-Max. pressure : 10 bar. (145 psi) 
-Ingress protection : IP65  
-Vibration resistance : IEC 68-2-6/1G 
6.Measuring Performance 
-Instrument accuracy : +/- 10mm 
-Repeatability : +/- 1mm  
-Update interval : 1 Second 
-Measuring range : Depend on Antenna type and products nature, see diagram at page 4 

Details

datasheet

manual

The MRG-10 measures liquid level by transmitting low energy radar pulses toward a liquid surface and receiving the radar echoes. The travel time for the radar pulse is proportional to the distance between the gauge and the surface.

The radar pulse is virtually unaffected by the contents and atmosphere of the tank, temperature or pressure. Thus radar measurement is proven to be the most reliable gauging method in most applications. Furthermore, maintenance requirements are practically zero because no part of the gauge is in physical contact with the liquid.
These features make the MRG-10 very well suited for storage and buffer tanks in the chemical and water industry.

The MRG-10 is most appropriate for calm liquid surfaces. If you intend to use the MRG-10 to measure turbulent surface liquids, it may be recommended to employ a still pipe used in order to achieve a calm surface

The MRG-10 is appropriate for storage tanks or buffer tanks that have relatively calm surfaces.

  • Chemical and petroleum
  • Pharmaceuticals
  • Food and beverage


Other applications include:

  • Industrial water such as river intake gates
  • Water supply
  • Sewage water treatment plant
  • Hydraulic power station

♦Application Examples

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information