Quạt thổi Ion lắp ở trên KASUGA IOH-02
Hãng sản xuất: KASUGA Model: IOH-02 - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Phương pháp tạo ra dòng Ion: Sự phóng điện DC
Kim điện cực phóng : Bằng hợp kim đặc biệt có sự hấp thụ bụi thấp
Nguyên lý kiểm soát Ion cân bằng *: Kiểm soát bằng mạch điện D.I.C
Ion cân bằng *: Trong phạm vi ± 10V (tại thời điểmcài đặt của nhà máy), cho phép điều chỉnh phù hợp
Tốc độ quạt:Có thể thay đổi (không theo bước)
Thể tích khí tối đa: 3.0 m3/Phút x 2 quạt
Vận tốc luồng không khí lớn nhất : 0.70m/ giây (mức cao)
- Cảnh báo hiển thị:
+ Đèn cảnh báo nhấp nháy: cảnh báo làm sạch (giới hạn kiểm soát), báo động điện áp cao
+ Đèn cảnh báo sáng: Ngắt điện áp cao (khi điện áp vượt quá phạm vi điều khiển hoặc báo động điện áp cao liên tục)
- Ngõ ra cảnh báo (ngõ ra mở rộng)
+ ion hóa ngõ ra: Trong thời gian ion hóa (ngõ ra điện áp cao)
+ Ngõ ra cảnh báo: Trong khi đèn báo nhấp nháy hoặc sáng
Ngõ vào mở rộng: Cho phép phản hồi ngõ vào về điện thế tĩnh điện hoặc sự cân bằng ion
Số lượng ozone sản xuất *: 0,02 ppm hoặc ít hơn
Môi trường hoạt động: Nhiệt độ: 0 °C-40 °C, Độ ẩm: 80% RH hoặc thấp hơn (không ngưng tụ)
Điều kiện đầu vào: AC100-240V (cho phép ghép nối nhiều thiết bị, lên tới 10 cái)
Cáp nguồn: Khoảng 1,8 m (cáp điện với điện tiếp đất)
Công suất tiêu thụ: 32VA
Khối lượng: Khoảng 3.6kg
Khoảng cách đo 300mm
- Control by the new D.I.C. circuit* not only maintains a certain ion balance but also ensures a consistent amount of ion generation. This allows ionization in the optimal condition at all times, with no degradation of ionization performance. Frequency of maintenance can thus be significantly reduced.
- The rear fan guard can easily be removed just by sliding it, which allows easy access to the area around the electrodes, ensuring easy maintenance.
- When the ionizer is turned on, it displays the remaining interval before the next maintenance.
- Electrode needles made of a special alloy with low dust emission allow use of the unit in a clean-room environment.
When the unit is turned on, it displays the remaining interval before the next maintenance by the number of LED lamps lit.
*The D.I.C. (Double Ion Control) circuit maintains the optimal condition for static elimination by simultaneously controlling the ion balance and amount of ion generation.
Specifications
Model | IOH-03 | IOH-02 | |
---|---|---|---|
Ion generation method | DC corona discharge | ||
Discharging electrode needle | Special alloy with low dust emission | ||
Method of ion balance control | Control by D.I.C. circuit | ||
Ion balance* | Within ±10V (at time of factory shipment), permits fine tuning | ||
Fan speed | Variable (non-step) | ||
Maximum air volume | 3.0 m3/min × 3 fans or 2 fans | ||
Maximum airflow speed* | 0.87m/sec | 0.70m/sec | |
Alarm display | Alarm lamp blinking | Cleaning alarm (control limit), high-voltage alarm | |
Alarm lamp staying lit | High-voltage stop (when voltage exceeds the control range or the high-voltage alarm continues) | ||
Alarm output (External output) |
ionization output | During ionization (high-voltage output) | |
Alarm output | While alarm lamp blinks or stays lit | ||
External input | Permits feedback input of electrostatic potential or ion balance | ||
Amount of ozone production* | 0.02 ppm or less | ||
Operating environment | Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation) | ||
Input condition | AC100-240V (permits series connection of up to 10 units) | ||
Power cable | Approx. 1.8 m (power cable with grounding electrode) | ||
Power consumption | 54VA | 32VA | |
Mass | Approx. 5.0kg | Approx. 3.6kg |
*Measurement distance450mm
Ionization performance
Dimensions [mm] and names of parts
IOH-03
Intended use
- Ionization in a wide area on the workbench used in cell production process
- Ionization from objects on a conveyor
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch