For full functionality of this site it is necessary to enable JavaScript.

HANNA HI 504112-2 pH / ORP 디지털 제어기 (센서포함) (단일 설정 점, ON / OFF 제어, 단일 아날로그 출력)

-Power Supply: 230 VAC ±10%; 50/60 Hz; 10 VA

- Range:

+pH: -2.00 to 16.00 pH

+ORP: -2000 to 2000 mV

+Temperature: -30 to 130.0°C

-Resolution:

                +pH: 0.01 pH

+ORP: 1 mV

+Temperature: 0.1°C (above -10 °C); 1°C (below -10°C)

-Accuracy @ 20°C:

                +pH: ±0.02 pH

+ORP: ±2 mV

+Temperature: ±0.5°C (-9.9 to 130.0°C); ±1°C (-30 to -10°C)

-Input Impedance: 1012 Ohm

-Digital Input for the pH/ORP/°C: RS485

- Other Digital Insulated Inputs: two digital insulated inputs: one for hold and one for the advanced cleaning; ON state: 5 to 24 VDC

- Digital Insulated Output: a digital insulated contact closed upon hold mode

-Temperature Compensation: automatic or manual, -30 to 130°C

-Temperature Probe: with three-wire or two-wire Pt100/Pt1000 sensor (with automatic recognition and damage test)

-Over Current Protection: 400 mA 250V quick blow fuse

-Max. Oscillation Frequency: 8 MHz

-Relays 1, 2, 3, 4: electromechanical relay SPDT contact outputs, 5A-250 VAC, 5A - 30 VDC (resistive load); fuse protected: 5A, 250V quick blow fuse

-Alarm Relay: electromechanical relay SPDT contact output, 5A - 250 VAC, 5A - 30 VDC (resistive load) fuse protected: 5A, 250V quick blow fuse

-Analog Output:

+ two independent outputs, 0 - 22 mA (configuring as 0-20 mA or 4-20 mA)

+ Resolution: 0.1% f.s.

+Accuracy: ± 2% f.s.

-Data Logging: 6000 pH/°C or ORP samples

-Environment: 0 to 50°C(32 to 122°F); RH max 85% non-condensing

-Casing: IP20 (housing); IP54 (front panel)


- Weight : 1.6 kg (3.5 lb.)

 

- HI 504112-2 is supplied complete with mounting brackets and instructions

Details
  • 품질 보증
  • 공인 보증
  • 집으로 배달
  • 간단하게 거래하기

할인과 정보를 받기 위해 등록하기