For full functionality of this site it is necessary to enable JavaScript.

Bộ ghi dữ liệu Hioki RM8880-20

Thông số kỹ thuật
- Số kênh: 4 kênh analog + 8 kênh đầu vào logic tiêu chuẩn
- Thang đo:  10 mV to 100 V/div, 13thang, độ phân giải: 1/640 thang đo
- Đầu vào tối đa cho phép: 600 V AC/DC: 600 V AC/DC Cat III, Cat IV so với đất
- Đặc tính tần số: DC to 100 kHz (±3dB)
- Thời gian: 100 μs to 100 ms/div, 10thang, thời gian lấy mẫu: 1/100 của thang đo
- Chức năng đo: ghi bộ nhớ( ghi tốc độ cao), Ghi dữ liệu trên thời gian thực
- Dung lượng bộ nhớ: 14bits x 1M-Words
- Phương tiện lưu trữ: thẻ nhớ USB2.0, thẻ CF x1 ( dung lượng lên tới 2 GB)
- Máy in: 112x18mm, tốc độ in : 10mm/s
- Hiển thị: 5.7-inch VGA-TFT color LCD (640 × 480 điểm ảnh)
- Giao tiếp: USB2.0
- Ngôn ngữ: English, Japanese, Chinese
- Nguồn:
  + AC ADAPTER Z1002: 100 to 240 VAC (50/60 Hz), 11 VA/40 VA khi dùng máy in
  + BATTERY PACK Z1000
  + Pin LR6 (AA)× 8
  + DC power supply: 10 to 28 VDC
- Kích thước, khối lượng: 205×199×67mm, 2.16 kg
- Thiết bị đi kèm: Hướng dẫn sử dụng x1, AC ADAPTER Z1002 × 1, Hộp pin x1, Dây đeo x1, Cáp USB, Đĩa ứng dụng x1
- Bảo hành: 12 tháng

Chi tiết
Number of channels 4 analog channels + 8 logic channels (standard) Note: Isolated analog channels, isolated input and frame, logic has common GND
Measurement ranges
(10 div full-scale)
4 channels of voltage measurement; mode switchable between instantaneous waveform, or RMS value
10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range
RMS value mode: 30 Hz to 10 kHz, Crest factor: 2
Max. rated voltage Between terminals: 600 VAC, DC
Between terminal to earth: 600 VAC, DC CAT III, 300 VAC, DC CAT IV
Frequency characteristics DC to 100 kHz (±3dB)
Time axis (High-speed function) 100 μs to 100 ms/div, 10 ranges, Sampling period: 1/100 of range
Recording intervals (Real-time function) 100 μs to 1 minute, 19 selections (simultaneous sampling in all channels)
Measurement functions High-speed function (high speed recording)
Real-time function (actual time recording)
Memory capacity 14-bits × 1M-Words/ch (1 word = 2 bytes)
Removable storage CF Card slot ×1 (Up to 2 GB), USB 2.0 memory ×1
Printing [Printer unit is option] 112 mm (4.41 in) × 18 m (59.06 ft), thermal paper roll, Recording speed : 10 mm (0.39 in)/sec
Note: Printing is not supported when using alkaline batteries
Display 5.7-inch VGA-TFT color LCD (640 × 480 dots)
Displayable languages English, Japanese, Chinese
Communication interfaces USB 2.0 mini-B receptacle × 1; Transfers files from the installed CF card or USB memory stick to a PC when connected, and External PC control
Power supply AC ADAPTER Z1002: 100 to 240 VAC (50/60 Hz), 11 VA (when Real-time recording) , 40 VA (when Real-time recording and printing)
BATTERY PACK Z1000: AC adapter has priority when used in combination with battery pack, recharge with AC adapter 3 hours, Continuous use 3 hours (at back-light ON)
LR6 (AA) alkaline batteries × 8, Continuous use 40 minutes, (with back-light ON, cannot be used with the PRINTER UNIT)
DC power supply: 10 to 28 VDC (cable available by special order)
Dimensions and mass 205 mm (8.07 in) W × 199 mm (7.83 in) H × 67 mm (2.64 in) D, 1.66 kg (58.6 oz) (with the BATTERY PACK installed)
When printer is combined - with main unit: 303 mm (11.93 in) W × 199 mm (7.83 in) H × 67 mm (2.64 in) D, 2.16 kg (76.2 oz) (with the BATTERY PACK installed)
Accessories Instruction Manual × 1, AC ADAPTER Z1002 × 1, Alkaline battery box × 1, Strap × 1, USB cable × 1, Application Disk (Wave Viewer Wv, Communication Commands table) × 1

Catalog

pdficon MR8880-20
product catalog.pdf (2.67 MB) (2013-06-25 updated)

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi