Quạt thổi Ion Kasuga KD-730B
Hãng sản xuất: KASUGA Model: KD-730B - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Phương pháp tạo ra dòng Ion: Sự phóng điện DC
Kim điện cực phóng : Bằng Tungsten
Ion cân bằng *: Trong phạm vi ± 10V (tại thời điểmcài đặt của nhà máy), cho phép điều chỉnh phù hợp
Tốc độ quạt:Có thể chuyển thấp/cao
Thể tích khí tối đa: 2.24m3/Phút(mức cao)
Vận tốc luồng không khí: 1.7m/ giây (mức cao)
Ngõ ra cảnh báo: đèn LED ở mặt trước chỉ thị đỏ cảnh báo phải làm sạch hoặc dừng điện áp cao
Khối đầu cuối: đầu vào DC24V, đầu ra DC24V, đầu ra cảnh báo, đất
Số lượng ozone sản xuất *: 0,02 ppm hoặc ít hơn
Môi trường hoạt động: Nhiệt độ: 0 °C-40 °C, Độ ẩm: 80% RH hoặc thấp hơn (không ngưng tụ)
Điều kiện đầu vào: DC24V (bộ chuyển đổi AC dành riêng hoặc khối thiết bị đầu cuối)
Dòng tiêu thụ: 380mA
Khối lượng: Khoảng 900g
Khoảng cách đo 300mm
Bắt buộc có nguồn vào chọn thêm
Features
- The lamp signals when the unit needs cleaning, ensuring that you never miss the appropriate time for maintenance.
- Power input and output can be made via the terminal block on the rear. This allows easy series connection of multiple units without an AC adapter for each, which is convenient when installing several units in a manufacturing device. The alarm output also makes it easy to interlock the unit with a manufacturing device so that signals indicating the need for maintenance or occurrence of abnormality are transmitted to the device.
- The locking mechanism applied for the angle adjustment mechanism prevents a change of angle due to vibration or other such factors.
- The discharging electrode needles are mounted directly on the fan’s body, enabling the body’s ultra-slim dimensions. (Patented)
- Our proprietary technologies permit use of a single high-voltage transformer for generating high-voltage power, both positive and negative, and adoption of a built-in ion-balance adjustment circuit. This eliminates the need for concern about opposite charge, a problem faced by conventional DC-type units that would be caused by failure of one of two transformers. (Patented)
- This ionizer can be used safely for ionization from electronic devices because its stainless steel fan guard is grounded and therefore stabilizes the ion balance and shields the electric field. (Patented)
- CE certified product
Specifications
Main unit of the ionizer
Model | KD-730B |
---|---|
Ion generation method | DC corona discharge |
Discharging electrode needle | Tungsten |
Ion balance* | Within ±10V (at time of factory shipment), permits fine tuning |
Fan speed | HIGH/LOW switchable |
Air volume | 2.24m3/min(HIGH) |
Airflow speed* | 1.70m/sec(HIGH) |
Alarm output | Cleaning alarm and high-voltage stop indicated by the LED lamp on the front panel |
Terminal block | DC12V input, DC12V output, alarm output, ground |
Amount of ozone production* | 0.02 ppm or less |
Operating environment | Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation) |
Input condition | DC12V (adapter or terminal block) |
Consumption current | 380mA |
Mass | Approx. 900g |
*Measurement distance: 300mm
Dedicated AC adapter
Model | AC adapter for KD-730B |
---|---|
Input conditions | AC100 - 240V 50/60Hz |
Output voltage | DC12V |
Mass | Approx. 270g |
Ion balance and ionization performance
Dimensions [mm] and names of parts
Main unit of the ionizer
Dedicated AC adapter
Intended use
- Manufacturing and assembly processes of various electronic devices
- Use in devices such as handler, appearance tester, lead forming device, and mounter
- Prevention of dust adhesion to optical components and LCD
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch