Máy đo tĩnh điện Máy đo tĩnh điện cơ thể người KASUGA KSD-4100 (±10kV) Tên KASUGA KSD-4100 Human body static meter (±10kV) KASUGA KSD-4100
Hãng sản xuất: KASUGA Model: KSD-4100 - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Phương pháp phát hiện: Cảm biến tĩnh điện kiểu rung
Phạm vi đo: ±0.01 - ±10kV
Ngõ ra analog : 0 - ±1000mV
Độ chính xác đo lường: Trong phạm vi ± 5%
Chế độ đo: Liên tục / Bắt đỉnh
Bộ nhớ dữ liệu: Lên đến 20 giá trị
Nguồn cung cấp 2 pin AA alkaline (hoạt động liên tục 10 giờ)
Kích thước:
-Máy chính: 121×70×22mm
-Đầu dò: 125mm×40φ
Khối lượng: Khoảng 350 (kể cả pinđầu dò )
Mua thêm Bộ chuyển đổi AC / KSD-AC1 (AC100-240V)
Cáp đầu ra analog / KSD-REC (chiều dài: 1.000 mm)
Human body static meter (KSD-4000/KSD-4100)
Each electronic device and metal tool that workers handle has its own ground electrostatic capacity and is charged with human body static. When a charged electronic device touches the ground or a metal tool touches an electronic device, a transient current with high peak current will flow at a high speed, resulting in a failure. Use of a human body static meter ensures accurate measurement of static on the body, making it possible to immediately judge whether the static will harm an electronic device. It also informs of how effective conductive floors, static mats, static shoes, wrist straps or other countermeasures are in lowering human body static.
Features
- Static on the user’s body is easily measured by holding the probe in one’s hand.
- High-resolution measurement at ±0.1V is possible. (KSD-4000)
- Permits measurement over a wide range.
- Allows switching between peak hold measurement and continuous measurement.
- Use with a recorder provides a continuous record of changes in human body static caused by the worker’s movements.
- Permits easy evaluation or education of workers concerning countermeasures against static.
- Equipped with a built-in circuit that detects and informs of failure of the detection sensor. (Patented) (KSD-4000)
- The Sleep mode saves battery power when forgetting to turn the unit off. (KSD-4000)
Specifications
Model | KSD-4000 | KSD-4100 |
---|---|---|
Detection method | Vibration-type static sensor | |
Measuring ranges | ±0.1 - ±999.9V | ±0.01 - ±10kV |
Analog output | 0 - ±999.9mV | 0 - ±1000mV |
Measurement precision | Within ±5% | |
Measurement mode | Continuous/ Peak hold | |
Operating environment | Temperature: 0°C-40°C,Humidity: 65% RH or below (no condensation) | |
Power supply | 2 AA alkaline batteries (10 hours or more of continuous operation) | |
Dimensions | Main unit: 121×70×22mm Probe: 125mm×25φ |
Main unit: 121×70×22mm Probe: 125mm×40φ |
Mass | Approx. 270g (including probe and batteries) |
Approx. 350g (including probe and batteries) |
Options |
AC adaptor : KSD-AC1(AC100V - 240V) |
Measurement example
Names of parts
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch