For full functionality of this site it is necessary to enable JavaScript.

Bộ thực hành thiết kế mạch logic số CPLD/FPGA LEAPTRONIX LP-2900 WITH ALTERA CYCLONE 5CEFA2

Phù hợp cho các nhà thiết kế ứng dụng cho truyền thông, tự động hóa công nghiệp, dụng cụ thông minh, xử lý hình ảnh, điều khiển động cơ mở rộng, vv Để cho phép người dùng có các nền tảng thử nghiệm tuyệt vời,
Hỗ trợ chíp
        ALTERA: FLEX10K30ATC144 (TQFP-144) /  5CEFA2 (FBGA-256)
        XILINX: XC2S50 (PQFP-208)
Bộ phát tín hiệu. 1K/10K/ 100K/1M/10MHz
Công tắc đầu vào locgic
        8 × 1 logic input original press point with light
        8 × 2 logic input Dip switch
        4 impulse press button generator (2 positive pulse; 2 negative pulse)
        3 × 4 array keyboard
Bộ chỉ thị ra
        8 × 8 led 2 màu
        LCD 16 × 2
        6 led 7 vạch
        3 × 4 LED đơn
        còi
Bộ tuyến tính
8bit D/A  2 bộ
        8bit A/D 2 bộ
Mạch 8051 1 bộ (không bao gồm vi điều khiển)
mạch CPLD, FPGA
Cung cấp bao gồm: Bộ LP-2900+ bo mạnh CPLD/FPGA CHIP BOARD lắp trên LP-2900, CD, Dây nguồn, Cáp USB

Chi tiết

Datasheet

 

CPLD/FPGA Digital Logic Circuit Design Experiment Kit


Introduction

Nowadays, CPLD and FPGA have been the first-choice components for the designers. It is suitable for the designers on application for communication, industrial automation, intelligent instrument, image processing, extensive engine control, etc. In order to allow users have excellent experimental platforms, LEAP series has provided platforms based on Altera or XILINX. Enabling engineers to realize the designs of logical circuit from experimental units.
 
Test Content
Combinational logic design, simulation and test
  1. Basic logic
  2. Subtractor 
  3. Decoder
  4. Combinational logic 
  5. Comparator
  6. Multiplexer
  7. Adder
  8. Encoder 
  9. Demultiplexer
Sequential logic circuit design, simulation and test
  1. Flip-flop device
  2. Shift register
  3. Shift counter register
  4. Synchronized counter
  5. Asynchronous counter
Analog logic circuit design, simulation and test
  1. A/D converter
  2. D/A converter
Thematic Application Test
  1. 8 × 8 dual color spot array LED control test.
  2. Digital clock
  3. Counter
  4. Electronic alarm clock
  5. Traffic light control
  6. Electronic dice
  7. Keyboard scan
  8. LCD display control test
  9. A/D, D/A converter test
  10. Easy CPU design
  11. VHDL/AHDL design
  12. Matching 8051 thematic test
Specification
  • Communication: USB or Printer Port
  • Power: 100V AC~240V AC
  • Frequency Range: 50/60 Hz
  • Dimension: 32cm x 22.6cm x 3.0/8.5cm
  • Weight: 3.5Kg
  • Operating Altitude: up to 5000 m
  • Operating Humidity: 90% (non-condensing)
  • Temperature: +5℃ ~ +45℃
Other Specifications
  • Chip Supported:
    • ALTERA: FLEX10K30ATC144 (TQFP-144) /  5CEFA2 (FBGA-256)
    • XILINX: XC2S50 (PQFP-208)
  • Signal Generation Unit:
    1. Programmable frequency generator
    2. Standard frequency 1K/10K/ 100K/1M/10MHz
  • Logic Input Switch:
    1. 8 × 1 logic input original press point with light
    2. 8 × 2 logic input Dip switch
    3. 4 impulse press button generator (2 positive pulse; 2 negative pulse)
    4. 3 × 4 array keyboard
  • Output Unit:
    1. 8 × 8 dual color point array LED display
    2. LCD 16 × 2 monitor
    3. 6 digits 7 nodes monitor
    4. 3 × 4 LED output
    5. Buzzer output x 1 set
  • Linear Unit:
    1. 8bit D/A converter x 2 sets
    2. 8bit A/D converter x 1 set
  • MPU unit:
    • 8051 and CPLD/FPGA match circuit test
PC System Requirement
  • Operating System: Refers to the original CPLD / FPGA software install requirement.
Standard Accessories
  • Main unit x1
  • CD x1 (included Altera Baseline V9.23 driver)
  • AC power cord x1
  • 25-pin printer cable or USB cable x1
  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi