emin

Memmert HPP1060 实验室环境室/ 温度/ 湿度/ 双门(1060L)

  • 制造商: MEMMERT
    Model: HPP1060
    来源: Germany
    保障: 12 month
    • 报价要求 报价要求
  • 374,463,159 VND
  • 价格合理详情请致电

    热线:   (+84) 966520220

    电话:  +84 (24) 62923267


      

  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

Manufacturer: Memmert- Germany

Model: HPP1060

Origin: Germany

Warrant: 12 months


Volume: 1060 l

Interior dimension: 1040W x 1200H x 850D mm

Exterior dimension: 1224W x 1726H x 1107D mm

Stainless steel grids: 2

Max. number of grids: 14

Working temperature range without humidity: 0 (at least 20 below ambient temperature) to 70°C

Working temperature range with humidity: +5 (at least 20 below ambient temperature) to 70°C

Setting temperature range without humidity: 0 – 700C

Setting temperature range with humidity: 5 – 700C

Setting accuracy: 0.1°C

2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error

Setting range humidity: 10 – 90% rh

Humidity supply with distilled water from external tank by self-priming pump

Humidification by hot steam generator

Dehumidification by cold trap using the Peltier technology

Setting accuracy: 0.5% rh

ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays

Language settings: German, English, Spanish, French, Polish, Czech, Hungarian

Adjustable parameters: temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones

Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function HeatBALANCE: adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %

Function SetpointWAIT: the process time does not start until the set temperature is reached.

Calibration: three freely selectable values each, temperature and humidity

Interface: Ethernet LAN, USB

Programme stored in case of power failure

Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function

Displaying of already logged protocol data on the ControlCOCKPIT (max 10000 values correspond to approx. 1 week)

Temperature control: over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display

Additionally integrated over and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature

Integral fault diagnostics for temperature and humidity control

Alarm: visual and acoustic

Energy-saving Peltier heating-/cooling system integrated in the rear

Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel

Door: fully insulated stainless steel door with 2-point locking, inner glass door, two leaves

Internal data logger with a storage capacity of least 10 years

Voltage: 230 V, 50/60 Hz

Electrical load: approx. 1500 W.

Ambient temperature: 16 – 40°C

Humidity: max. 70% rh, non-condensing

Installation: 4 feet; mounted on height-adjustable and lockable castors

Accessories:

+ Calibration certificate for 25°C/ 40% rh and 400C/ 75% rh (Memmert supply)

+ Stainless steel grids, 2 pcs

+ Water tank including connection hose

+ Manual


Chi tiết

Datasheet 



注册收新闻 - 获得优惠活动的机会